FitXref / HVAC Control Boards / Models / 902378
← All model pagesOFFICIAL CROSS-REFERENCE
902378 furnace control board replacement
The Nordyne 902378 furnace control board's official cross-reference replacement is ICM Controls ICM2812-KIT. ICM2812-KIT limit: ICM states the ICM2812-KIT is compatible only with 120 VAC Nordyne furnace models.
Replacement board
-
ICM Controls ICM2812-KIT Uses adapter harnesses 2, 8 & 9 from the kitLimit: ICM states the ICM2812-KIT is compatible only with 120 VAC Nordyne furnace models.Source: ICM Controls ICM2812-KIT Cross Reference (LIAF321)Link coming soon
Before you order
- Read the part number stamped or printed on the board itself, including any suffix letter. It must match 902378 exactly.
- Note the furnace model number from its rating plate; the installing technician will need it.
Questions about this board
What replaces the 902378 furnace control board?
Nordyne 902378 cross-references to ICM Controls ICM2812-KIT, according to the ICM Controls ICM2812-KIT Cross Reference (LIAF321). For the ICM2812-KIT: ICM states the ICM2812-KIT is compatible only with 120 VAC Nordyne furnace models.
Why does the ICM2812-KIT need adapter harnesses for 902378?
The ICM2812-KIT is one universal board for 200+ OEM part numbers. ICM's sheet assigns each part number the harness(es) from the kit that adapt it to that furnace; for 902378 that is adapter harnesses 2, 8 & 9. ICM states the ICM2812-KIT is compatible only with 120 VAC Nordyne furnace models.
Can I replace the 902378 board myself?
FitXref only identifies the part. A furnace control board switches line voltage and the gas valve, so a licensed HVAC technician should install it and check the furnace afterwards.
Other boards with the same replacement
VERIFY THE SOURCE