8068563 furnace control board replacement

The Whirlpool 8068563 furnace control board's official cross-reference replacement is ICM Controls ICM2812-KIT.

Furnace control boards switch 120/240V line voltage and the gas valve. This page is for identifying the correct replacement part only — it is not a wiring or installation guide. Improper installation can cause fire, electrical shock, or gas hazards; have a licensed HVAC technician do the actual replacement.

Replacement board

ICM Controls ICM2812-KIT Uses adapter harness 6 from the kitSource: ICM Controls ICM2812-KIT Cross Reference (LIAF321)
Link coming soon

Board type: Integrated furnace control board

Before you order

Read the part number stamped or printed on the board itself, including any suffix letter. It must match 8068563 exactly.
Note the furnace model number from its rating plate; the installing technician will need it.

Questions about this board

What replaces the 8068563 furnace control board?

Whirlpool 8068563 cross-references to ICM Controls ICM2812-KIT, according to the ICM Controls ICM2812-KIT Cross Reference (LIAF321).

Why does the ICM2812-KIT need adapter harnesses for 8068563?

The ICM2812-KIT is one universal board for 200+ OEM part numbers. ICM's sheet assigns each part number the harness(es) from the kit that adapt it to that furnace; for 8068563 that is adapter harness 6.

Can I replace the 8068563 board myself?

FitXref only identifies the part. A furnace control board switches line voltage and the gas valve, so a licensed HVAC technician should install it and check the furnace afterwards.

1010806 1012-83-9336A 1012-83-9337A 1012-925A 1012-925B 1012-925C 1012-933D 1380686 1380698 1380699 350486 350836

VERIFY THE SOURCE

Sources for this page

ICM Controls ICM2812-KIT Cross Reference (LIAF321) Part number and adapter harness table · retrieved 2026-11-04